- Видео 297
- Просмотров 13 272 073
On The Trowel
Добавлен 28 фев 2016
Kirk Johnstone Shows The Life of a Plasterer.
Basically I wanted to document what I do day to day so you will get videos of me working, a few tips and tricks, how to videos and probably a few funny stories from the pub.
The reason I made this chanel is to sort of leave a bit of me for my family.
I love hearing stories about my grandad, I've got a couple of pictures of him and I can vaguely remember him but he died when I was a little boy.
Can you imagine how great it would be if our grandparents and great grandparents left us actual videos footage of what their life was like. Well that's what I want to do and if you guys can benefit from it or even just enjoy watching my daily antics then all the better.
Anyway, have a great day.
Crack a can open and enjoy the show 😀
P.s. for any enquiries you can contact me at:
mrkirkjohnstone@gmail.com
Also if you enjoy my content and you would like to buy me a beer then just click on this little link below 🍻
HOW TO GET STARTED AS A PLASTERER AND GET INTO THE TRADE
Ready for Lots more work and better pay?
Social media marketing for free✅️
Higher Google ranking for free✅️
How to generate lots of work ✅️
Sales training ✅️
Step by step video course + lots lots more
click this link, your going to love this...
👇👇👇👇👇
www.buymeacoffee.com/Onthetrowel/membership
Social media marketing for free✅️
Higher Google ranking for free✅️
How to generate lots of work ✅️
Sales training ✅️
Step by step video course + lots lots more
click this link, your going to love this...
👇👇👇👇👇
www.buymeacoffee.com/Onthetrowel/membership
Просмотров: 3 640
Видео
STRAIGHTEN wonky walls with BondingCoat Plaster | 4 simple steps
Просмотров 39 тыс.День назад
Get 15% off Carly with code "TROWEL " when you click - bit.ly/OnTheTrowel_Carly_Offer Unlock the truth about your car's health with Carly, Using advanced Manufacturer diagnostics and Smart Mechanic that could save you thousands of pounds on car repairs. Carly is compatible with all cars from 2001 with an OBD2 port. Check what features are available for your car by visiting their website using t...
You will NEVER learn to Plaster until you can do this.
Просмотров 359 тыс.14 дней назад
seven.website/onthetrowel ☝️☝️☝️☝️ Hit this link to see what Seven can do for you. :: SUPPORT THE CHANNEL :: If you enjoyed that video and would like to buy me a cold one then you can do that here. 👇👇👇👇 www.buymeacoffee.com/onthetrowel :: EVERYTHING ELSE :: If you would like to join one of my courses, take a look at my merchandise store, connect with me on other social media or reach out for co...
DON'T TAKE ADVICE FROM IDIOTS | USE YOUR MIND TO WORK SMART
Просмотров 9 тыс.21 день назад
DON'T TAKE ADVICE FROM IDIOTS | USE YOUR MIND TO WORK SMART
THE LONGER THEY LEFT IT, THE MORE EXPENSIVE IT BECAME | BIG BATHROOM LEAK
Просмотров 22 тыс.28 дней назад
THE LONGER THEY LEFT IT, THE MORE EXPENSIVE IT BECAME | BIG BATHROOM LEAK
Plasterboard HACK | Every DIY'er Should Know
Просмотров 421 тыс.Месяц назад
Plasterboard HACK | Every DIY'er Should Know
The most in depth tutorial on the Internet | plastering over ARTEX
Просмотров 33 тыс.Месяц назад
The most in depth tutorial on the Internet | plastering over ARTEX
FITTING A BATHROOM FROM SCRATCH | PART 1
Просмотров 28 тыс.2 месяца назад
FITTING A BATHROOM FROM SCRATCH | PART 1
TEACHING ROGER TO PLASTER | NO PROBLEM
Просмотров 39 тыс.2 месяца назад
TEACHING ROGER TO PLASTER | NO PROBLEM
HEATING PIPES | HOW TO FILL THE CHASES
Просмотров 193 тыс.2 месяца назад
HEATING PIPES | HOW TO FILL THE CHASES
I FOUND A SECRET SWEATSHOP FULL OF PENSIONERS
Просмотров 19 тыс.2 месяца назад
I FOUND A SECRET SWEATSHOP FULL OF PENSIONERS
IS THIS THE MOST LUCRATIVE TRADE IN THE UK
Просмотров 20 тыс.2 месяца назад
IS THIS THE MOST LUCRATIVE TRADE IN THE UK
IMAGINE YOUR FIRST DAY WAS LIKE THIS
Просмотров 50 тыс.3 месяца назад
IMAGINE YOUR FIRST DAY WAS LIKE THIS
HOW TO PLASTER HUGE ARTEX CEILINGS
Просмотров 42 тыс.4 месяца назад
HOW TO PLASTER HUGE ARTEX CEILINGS
Turn £17 into £300 in 2 Hours Plastering
Просмотров 190 тыс.4 месяца назад
Turn £17 into £300 in 2 Hours Plastering
PLASTERING FOR JÜRGEN KLOPP |Aka daz the builder
Просмотров 50 тыс.5 месяцев назад
PLASTERING FOR JÜRGEN KLOPP |Aka daz the builder
MY INVOICE BROUGHT AN OLD LADY TO TEARS
Просмотров 757 тыс.6 месяцев назад
MY INVOICE BROUGHT AN OLD LADY TO TEARS
HOW TO EARN £1000 A DAY PLASTERING OVER ARTEX
Просмотров 196 тыс.6 месяцев назад
HOW TO EARN £1000 A DAY PLASTERING OVER ARTEX
I FOUND THE BEST EVER PRIMER FOR PLASTERING!
Просмотров 89 тыс.6 месяцев назад
I FOUND THE BEST EVER PRIMER FOR PLASTERING!
3 hour PLASTERING from Brick to Finish
Просмотров 56 тыс.8 месяцев назад
3 hour PLASTERING from Brick to Finish
Very good explanation, thank you for sharing.
I taught myself in 1991 and have been doing it ever since Blagging it was how I did it “Yes I have done that.. no problem” then research how to do it lol
Get your knee checked out 👍
Some trowels are 4" wide others 5" (and considerably more money) what size width is best? also whats the best length or most commonly used? 12, 14.16 inch long?
It’s called a hawk not a hand-board you’ll never be able to find a hand board in a hardware store
Thanks for clearing that up mate, I think thousands of viewers were confused over my terminology 🤣
Great job 👍👌
TIL. Thank you for making such a great video.
Brilliant video! Thank you for creating this.
I live in the US but have been to the UK several times. Here, we use drywall for interior walls. Tape and mud the joints and screw heads and paint. Is that not a thing in the UK? Older houses like mine that were built 70 years ago have plaster and lath walls.
Very good
20 years later of doing this every day I could be almost as good as you.
Hello,im from California usa,i once was a hod carrier for 3 old time plasters, mostly did room additions inside plaster and outside stucco,i was 20yrs old when these guys were middle 60's and could hardly keep up with em,i can still hear em yelling,"i need more mudd",hard work but great days for sure,enjoyed your video,much continued success to you😉
Nice collection of tips. I've been a plasterer for almost 50 years. I'm retired from the trade as a means of making a living but I still have the chops to do work for friends and family as favors. My only advice to add to everything presented in this video is to clean your trowels and hawks (plasterboard) throughout the workday so you don't end up with that thin film of dried plaster on your tools over time. My plaster hoe, trowels, and hawks are still clean to this day because I took the time to rinse them off with a big brush after every wheelbarrow load of plaster. My wheelbarrows also got the same treatment with a hose between loads. Clean tools are a builder's best friend. Thanks for your videos. It brought back fond memories of dancing with plaster for so many years.
Brilliant sir. I didn't matter how much I worked on my wall technique if I couldn't get a good, clean, consistent knife full of mud
No need for sbr here?
Stumbled on your channel by chance. Our family trade is stucco and plaster, its great to see your work
Kirk, can you do some solid wall plastering. Particularly internal exterior walls like window walls and how to combat them. Im facing an issue where i cant baton and foil back the board due to the style of window and unsure on rendering and skimming without stopping damp etc. Quite new to the game. It would be great to see. Your content is great. Elliot
As a Plasterer myself, techniques , tools, and methods are done differently here in the USA. Good video
A Craftsman takes the mud off the top of the pile, not off the bottom. They call it cutting mud or plaster.
Superb tutorial mate. People like you make the world a better place lad, be sure of that.
well done video
nice watching a craftsman do his thing.
Do you know what? I’ve seen TikTok memes of you and I’ve heard people on site calling you an attention hoe and tbh kurt I think you give some good old school advice, I think your same era as me late 90s on trowels, I’ve never seen any live streams where your talking bollox, I’ve noticed your abit over dramatic but that’s probably just your personality not craving attention, or am I wrong and others right? What do u think to blaine? He’s a humble honest guy isn’t he.
This is the best video yet, full of great info.
What render colour finish is that? It looks really nice.
This guys a legend
render from right to left because cement is thicker, so you render to an edge rather than left to right which then you would be overlapping and leave a void. so j b taylor told me at college. many years ago.
Does the tape make the wall have a bulge in wall
Just a shame everyone wants it done for nothing.. you cant put a price on skill and yrs of experience but.. if your blasting the learners for their mistakes that you probably made too then need to stop thinking your better than someone else.. we all learn at one stage or another and mistakes are apart of learning lol ive been at it 17yrs now and i moved from my home town where i had a customer baisis and now nobody in Scotland will take me on even after showing them 000s of pictures 🤣🤣 and expect you to take just over min wage 🤣🤣
Youn my coaching group, I'll show you how to get busy in a couple of weeks
Brilliant video. 'Wish your T-shirts were available in the States, not only the U.K
Pukka
My man wastes not one dab of plaster.
you're good...
Brilliant tutorial. Magic with a trowel. Now i know. Im subscribing, im a carpenter that can use these skills when needed. Cant wait for more of your videos to keep learning 😲👏🫡💪💚
Reminds me of Matthias Wandel's wood glue tests: ruclips.net/video/xUCB4dhvVlc/видео.html
I should put the can down and get back to the framing, but nope. This is great!
have you tried spraying the accelerator on after troweling up, just wondering if you could, then you have time to trowel until your ready for quick set.
I find my plaster skills have improved just seeing the shirt.
🤣🤣🤣
Fascinating. Like poetry in motion. Kudos to you sir!
None sense 👎👎👎
Strange dude arnt ya
Brilliant.
The second example of suction is created due to air pressure surrounding the blob of plaster.
Great advice for any trade. The bit bit about cleaning up in spare moments speak volume Guys as genuine as Kirk are rare gems.
👎👎
Everyone has their own technique and this is getting very boring
Are you going to plaster something ?
Just the practical way of doing things properly. Thanks
I’m diy and I do that.
Nice to know that there are good people out there. Enjoy a cold one/warm one/coffee on me.
Thank you very much my mate thankyou 🙏
Anyone else gutted that they are only just watching this video 😭